We are a unique remodeling company that is a Design and Build Remodeling company with a complete Showroom that displays all the products for you need to complete your remodeling project.
Until you can make a personal visit to our Showroom, this Product page may help you review our recommended cabinet lines. For even more details, there are links provided to their websites.
Adelphi Kitchen Cabinets
Sometimes called 3/8” offset by other manufacturers, this style uses a door with a
lipped edge that has a “rabbet” on the rear of the profile. This results in half of the 3/4”
door thickness being recessed into the cabinet frame, leaving 3/8” exposed. The door
covers 1/4” all around the cabinet frame opening, meaning doors and drawers will be
a total of 1/2” wider and higher than the frame opening. Cabinet uses 1 1/2” framing
throughout. See illustration to left.
This style has the doors and drawers lying completely on top of the face frame. The
entire edge profile and 3/4” thickness is visible. The door covers 1/2” all around the
cabinet frame opening, meaning doors will be a total of 1” wider and higher than
the frame opening. Drawer fronts follow the same procedure. Marginal overlay utilizes
1 1/2” cabinet framing widths by default. See illustration shown to the left.
This style also has the doors and drawers lying completely on top of the frame. The
entire edge profile and 3/4” thickness is visible. Door and drawer sizes are not based
on cabinet openings, but rather on using “reveals” around all of the fronts.
• At the top of walls and base cabinets there is a reveal of 1/4”.
• At the bottom of walls and bases there will be NO reveals.
• At the left & right edges of all cabinets is an 1/8” reveal, so when cabinets are butted
together it will maintain the look of 1/4” reveals. Framing is 1 1/2” wide with the
exception of outer stiles being 1 1/4” wide, and certain center stiles on multi-door
cabinets are 2 1/2” wide. See drawing shown to the left.
BEADED INSET -or- FLUSH INSET
In these styles, the doors and drawers are flush inside the face frame. None of the edge
thickness is visible. We offer inset in two flavors, beaded inset or flush inset. Beaded
inset uses a 1/4” bead applied to the inner edge of cabinet openings that have doors/drawers.
Flush inset is simply flat edged cabinet frames like on our other styles. Beaded inset uses
1 1/4” framing throughout. After construction, the 1/4” bead is applied to the openings.
This makes outer pieces 1 1/2” and the center, cross pieces yield out to 1 3/4” wide. See
illustration for example of beaded inset.
STANDARD FRAMELESS FULL OVERLAY
The frameless style has the doors and drawers lying almost completely over the edge of
the cabinet. The entire edge profile and 3/4” thickness is visible. Door and drawer sizes are
not based on the cabinet opening, but rather on using “reveals” all around the cabinet box.
• At the top of wall cabinets there is a 2mm reveal and 6mm at the top of base cabinets.
• At the bottom, left and right sides of walls and bases there is also a 2mm reveal.
Select all the Materials and products you need for your Remodeling Project right in our Showroom.
Make sure to browse our Bathrooms and Kitchens in our Photo Gallery or visit our Ellicott City Showroom today:
Our certified Design Consultants can help you with anything from Kitchen and Bath designs to full architectural plans for Custom Homes or Additions.
Our Construction Consultants will help you thru every phase of your project from Proposals thru Turn-key Completion. We have our own staff as well as our own Project Managers for your Remodeling project.
Our 1000 sq ft. showroom is strategically designed for you to choose all materials for your remodeling project; whether it's a minor remodeling update, or you want to double the size of your home!
9054 Chevrolet Drive
Ellicott City, Maryland 21042
Kitchen Remodeling + Bath Remodeling + Home Remodeling + Home Additions + Preservations